Converting a Fuel Vary to Run on LP Fuel



This online video from Sears PartsDirect shows how to set up an LP fuel conversion kit. Fuel ranges are set up by the manufacturing unit to operate making use of natural fuel. This conversion kit will let you to operate your vary making use of LP fuel. This online video is for reference only. Diligently comply with the directions provided with the LP kit to convert your vary. The LP conversion kit will have to be set up by a qualified installer, acquainted with all precautions required and comply with point out and area demands. Incorrect installation could end result in fire, explosion or output of carbon monoxide, leading to home hurt, personal harm or reduction of lifestyle. You should not endeavor this conversion unless you happen to be a qualified installer.

Take a look at us at:

http://www.searspartsdirect.com?sid=soc:youtube:converting-a-fuel-vary-to-operate-on-lp-fuel

Or simply call one-800-437-1673 to talk with a pieces professional.

The online video features these pieces and instruments. Search up your product to make guaranteed you get the correct pieces for your vary.
LP Conversion Package

http://www.searspartsdirect.com/component-selection/316542417/0022/628.html?sid=soc:youtube:direct-component-connection

Find pieces for your vary at:

http://www.searspartsdirect.com/partsdirect/product-varieties/Vary-Components?sid=soc:youtube:vary-pieces

Or click on listed here to agenda an appointment with a maintenance technician. https://www.searshomeservices.com/maintenance#showall

Transcript:
Fuel ranges are set up by the manufacturing unit to operate on natural fuel. Set up the LP conversion kit if you want to use LP fuel. This tutorial is for reference only. Diligently comply with the directions provided with the manufacture accepted LP kit to convert your vary. Warning: The LP conversion kit will have to be set up by a qualified installer, acquainted with all precautions required and comply with point out and area demands. Failure to comply with directions could end result in fire, explosion or output of carbon monoxide leading to home hurt, personal harm or reduction of lifestyle. The qualified installer is responsible for the right installation of the LP conversion kit. You should not endeavor this conversion unless you happen to be qualified to finish it safely. Use get the job done gloves to secure your fingers. Now, let’s get begun. Shut off the house circuit breaker for the vary. Switch the fuel shut-off valve to the off situation. Take away all the cooktop grates. Raise the burner caps off the burner heads. Using a 3/sixteen-in socket, eliminate the nuts that safe the fuel burner heads in place. Take away the burner heads. Using a seven-mm nut driver, eliminate the orifices from the burner orifice holders. Determine which LP orifices go to the vary burners. The LP conversion kit directions provide the LP orifice BTU scores. Refer to your owner’s handbook to see the BTU scores of the vary burners and match the LP orifices to the burners based mostly on their BTU scores. Screw the LP orifices firmly on to the burner orifice holders. Placement the burner heads in the right destinations. Reinstall the burner head screws and tighten them firmly. Cover the burner heads with the right burner caps. Reinstall the grates on the cooktop. Open up the hotter drawer absolutely. Pull up on the remaining launch lever and pull the hotter drawer out a little bit. Drive down on the correct launch lever and pull the hotter drawer out of the vary. Using a wrench, unscrew and eliminate the hex nut cap on the pressure regulator. Take away the plastic conversion plug. Flip the conversion plug about and reinsert it into the pressure regulator. Reinstall the hex nut cap. Tighten the broil burner orifice spud one- one/2 turns to bottom out snug versus the burner tube. Do not overtighten. Loosen the air shutter lock screw and open the air shutter absolutely. Tighten the air shutter lock screw. Tighten the bake burner orifice spud one- one/2 turns to bottom out snug versus the burner valve. Do not overtighten. Loosen the air shutter lock screw and open the air shutter absolutely. Tighten the air shutter lock screw. Placement the hotter drawer on the rails. Drive the hotter drawer shut. Change on the electrical circuit breakers and open the fuel provide valve. Check out the operation of the burners. If the oven flame is lifting away from the burner, lessen the air shutter opening. Take a look at the oven burners and regulate the air shutters to attain the correct flames.


Post time: Oct-31-2016