Truck Load Lifting Tool – Home Made



The 5.5 foot ramp is made from 2×3′s and a piece of 3/8″ plywood.
The sled uses 1/2″ plywood and short pieces of 2×3′s.
Candle wax was used to lubricate the ramp and the sled.
Two Ranger tailgate 1/4″ star screws are used to prevent the ramp from slipping off.
Note the short piece of 2×3 underneath the ramp to prevent the ramp from being lifted into the truck.
The Dewalt DP3750 is too heavy for me to lift.
Works like a charm.


Post time: Jan-02-2017